ISO 15552 Cylinder SAI Series

Product features

1. ISO 15552 standard cylinder (ISO6431 original),

2. The piston seal consists of two Yshape one-way seal structures with compensation function, long life and low starting pressure

3. Profiled aluminum pipes without ties have good corrosion resistance. With sensor conversion grooves on both sides of the body;

4. Cylinder spacer adjustment is smooth and stable 5. Cylinder and accessories for installation with some specifications are optional

Installation and application

1. When load changes in the work, the cylinder with abundant output capacity shall be selected.

2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5. The medium used by cylinder shall be filtered to 40µm or below.

6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7. The cylinder shall be carried out test run without load before application, Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface.Anti-dust caps shall be added in air inlet and outlet ports.

Characteristic:

• Easily cleans anodized surfaces
• Scraps and lubricants (NSF-H1) are approved for food applications
• Sanitary protective cover for unused mounting holes
• Available in eight sizes covering piston diameters from 25 mm to 125 mm
• You can choose between elastic cushions or pneumatic cushions
• Option to configure air connections for supply and exhaust air on the rear cover, providing increased flexibility when designing the system's ducting concept