Product feature HRS Series Airtac Rotary table cylinder
- Rack and pinion design, stable functioning.
- Double cylinder structure, double force could be achieved.
- Guide hole is designed on the both side of the cylinder body. which is simple to install.
- Standard come with both bumper and air cushion, providing excellent cushion performance.
Note: HRS10/15 only has bumpers (do not have air cushion).

Installation and application HRS Series Airtac Rotary table cylinder
- Dirty substances in the pipe pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of impurities into the cylinder.
- The medium used by cylinder requires 40 micron or lower filtration.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- If unit or components to be stored for an extended period of time, it is recommenced to apply an anti corrosive treatment to exterior. Dust caps shall be added Intet and outlet ports.


Notes when using AIRTAC HRS pneumatic cylinders
When using AIRTAC HRS pneumatic cylinders, here are some important notes you need to consider:
- Follow the instructions for use: Always make sure that you have read and understood the specific instructions for use of the HRS cylinder from the manufacturer. Following these instructions will help you use the product safely and effectively.
- Periodic inspection and maintenance: Perform periodic inspection and maintenance on the HRS cylinder to ensure stable operation and high durability. Make sure that parts such as bearings, dust seals and pneumatic valves are inspected and replaced when necessary.
- Protection from dust and dirt: Avoid allowing dust and dirt to enter the cylinder, as they can cause damage and reduce the performance of the product. Use suitable filters and guards to prevent dust and dirt.
- Adjusting pressure and flow: Make sure that the compressed air pressure and flow are adjusted to suit the requirements of the specific application. Use the regulating valve and pressure regulator to adjust the pressure and flow accurately.
- Do not overload: Avoid applying more force or load than the HRS cylinder can handle. Overloading can cause damage and reduce the product's life.
- Use quality materials: When replacing parts or accessories of the HRS cylinder, always use quality materials and genuine accessories from the manufacturer to ensure product performance and reliability.
In short, following the notes and regulations when using the AIRTAC HRS pneumatic cylinder will help you optimize the performance and life of the product, while ensuring the safety of your working process.