ISO 15552 Cylinder SE Series

Product features

1. ISO15552 and VDMA24562 standard cylinder,

2. The piston seal consists of two Yshape one-way seal structures with compensation function, long life and low starting pressure

3. Aluminum square tube without tie has good corrosion resistance;

4. The cylinder cushion adjustment is smooth and stable:

5. Cylinder and accessories for installation with some specifications are optional.

Installation & Use

1. When the load changes during work, the cylinder with abundant output power will be adjusted.

2. Must choose a cylinder that is relatively resistant to high temperature or corrosion under high temperature or corrosive conditions.

3. Necessary protective measures must be taken in environments with high humidity, lots of dust or oil dust, and water welding residue.

4. Contaminants in the pipe must be removed before connecting the cylinder to the pipe to prevent particles from entering the cylinder.

5. The medium used by the cylinder must be filtered to 40µm or less.

6. Antifreeze measures must be applied in low temperature environments to prevent freezing of moisture.

7. The cylinder must be tested without load before use. Before running, the spacer must be screwed to a minimum and released gradually to avoid cylinder damage due to excessive impact

8. The cylinder must avoid the influence of side load during operation to maintain the normal operation of the cylinder and prolong its life.

9. If the cylinder is dismantled and stored for a long time, please carry out anti-rust treatment on the surface. Dust covers must be installed at the inlet and outlet air ports.

More information

+ In addition to TSAI Cylinder, our company also distributes other AIRTAC products such as: Compressed air filters, Solenoid valves, Pneumatic valves, Throttle valves, Air couplings and Pneumatic accessories,...

+ 100% genuine product - with AIRTAC Distribution Certificate.